PRT-ZX16-DIN
The Protege DIN Rail 16 Input Expander provides the interface of up to 16 inputs for monitoring and automation in the Protege system with 16 inputs that can be used for extended monitoring functionality.
Special Features
- Connect any combination of normally closed or normally open inputs, configurable per input
- 16 monitored inputs
- Utilizes analog to digital processing with 5x over sampling
- 4 state input alarm using resistors to provide short, alarm, closed and tamper conditions
- High performance 32 Bit processor
- Secure encrypted RS-485 module communications
- Online and remote upgradable firmware
- Designed for use with industry standard DIN Rail mounting
Technical Specifications
| DC Input Voltage | 11-14VDC |
| DC Output Voltage | 10.83-14.0VDC 0.7A (typical) electronic shutdown at 1.1A |
| Operating Current | 80mA (typical) |
| Total Combined Current* | 3A (max) |
| Low Voltage Cutout | 8.7VDC |
| Low Voltage Restore | 10.5VDC |
| RS-485 | Module Network |
| Inputs | 16 high security monitored inputs (10ms to 1hr input speed programmable) |
| Trouble Inputs | 16 |
| Dimensions (L x W x H) | 156.8 x 90 x 60mm (6.17 x 3.54 x 2.36″) |
| Weight | 280g (9.87oz) |
| Operating Temperature | UL/ULC 0° to 49°C (32° to 120°F) : EU EN -10° to 55°C (14° to 131°F) |
| Storage Temperature | -10°- 85°C (14° – 185°F) |
| Humidity | 0%-93% non condensing, indoor use only (relative humidity) |
| Mean Time Between Failures (MTBF) | 784,316 hours (calculated using RFD 2000 (UTE C 80-810) Standard) |
Other Features
Power Supply
The Protege DIN Rail 16 Input Opto-Isolated Expander operates from a 12VDC input. Ultra low current requirements ensure cost effective power distribution.
Connectivity and System Expansion
Expanding the Protege System with local inputs and outputs from the Protege DIN Rail 16 Input Opto-Isolated Expander allows convenient cost effective expansion and added benefit of:
> 16 opto-isolated inputs capable of a large voltage range, ideal for use in lift control or automation installs
> 4 multiple function outputs for use in any programmable output entry, ideal for connection in an electrical switch room to control signage, lighting and building automation or system indicators
> Address configuration is achieved using the address programming feature of the Protege System Controller
Communication
Single RS-485 communication interface port used for all network communication functions and interconnects to other modules.
Upgradable Firmware
Utilizing the latest flash technology and high performance communication mediums, the firmware of the Protege DIN Rail 16 Input Opto-Isolated Expander can be updated using the ICT Loadit utility over the Protege system module network.
DIN Rail 16 Input Opto-Isolated Expander